Square window cleaning robot with an automatic spray of detergent function
The device features smart liquid dispensing directly to a washcloth, low noise level and long cord. Voice function ensures better control.
The robot perfectly cleans wide and high surfaces throughout a large area.
The robot perfectly cleans wide and high surfaces throughout a large area.
Efficient liquid input
Washing solution is sprayed from a special compartment inside the cleaning cloth. This helps to avoid fluid loss and dried marks caused by leaks, ensuring complete absorption. As a result you'll enjoy crystal clear windows with a minimum consumption of solution and no spillage of liquid on frames and handles.
Low noise level
The robot won't bother you or your neighbours. The noise level does not exceed 55 dB – quite a low value. Normally, the noise level of such devices is 65 dB or more.
Zorro Z7 is a perfect choice for cleaning even high windows with a large area. The power cord's length together with the adapter cord, allows it to go up to a height of up to 7,4 meters.150 ml of washing liquid is enough for cleaning an area of 80 sq.m. And when water runs out, the robot will warn you with a sound alarm.
Cleaning of large panoramic windows and shop windows
Voice assistant
The robot voices the commands and actions it performs, making control much easier. If you press a wrong button on the remote control, the voice assistant will immediately let you know about it.
The robot is only 80 mm thick and has no protruding parts. Its handle is made of soft material and folds when released. This enables you to use the robot in the space between windows and under bars without it getting stuck.
Slim design and foldable handle
Anti-slide tracks and drive
Drive and caterpillars of the robot are designed specifically for cleaning smooth glass wetted with liquid. This means that the tracks use a material that virtually "sticks" to the glass and thus prevents the device from slipping / ensures a high level of grip.
Perfect navigation and return to the starting point
Even when operating on large windows, the robot always returns to the point where it started a cleaning cycle. Slips and other interferences will not hamper navigation, as the device repositions itself at the end of each cycle.
Enhanced cleaning along frames and corners
Zorro Z7 window cleaning robot cleans along the frames most thoroughly. When approaching the frame, the robot leans against it twice to improve the quality of cleaning.
Double-pass algorithm
A navigation chip with a six-axis accelerometer and a monitoring microcontroller ensure accurate route preparation.
In addition to the standard mode, the robot's software also features a double cleaning mode. Once the mode is activated, the robot will clean your window in N-Mode and then repeat the cleaning cycle moving perpendicularly in Z-Mode.
In addition to the standard mode, the robot's software also features a double cleaning mode. Once the mode is activated, the robot will clean your window in N-Mode and then repeat the cleaning cycle moving perpendicularly in Z-Mode.
Cleaning of frameless surfaces
The cleaning robot is equipped with laser edge sensors. This means that it can clean frameless surfaces such as mirrors and furniture glazing. In addition, laser sensors are more durable than mechanical ones.
Safety cable and backup battery
The device has a reliable safety cable to ensure greater safety. In case of a sudden power outage the backup battery will allow it to stay on the glass for up to 40 minutes whilst giving an audible alarm.
High power BLDC motor
Z7 is equipped with a powerful and compact brushless motor that is more durable than other conventional electric motors.
Large microfiber cloths
A high-quality microfiber cloth washes windows leaving no water streaks. Its material collects dirt and absorbs moisture. The cloth's large size ensures more effective cleaning.
If your windows are very dirty, we recommend to make the first pass with a dry cloth and then to do the same with a wet one.
If your windows are very dirty, we recommend to make the first pass with a dry cloth and then to do the same with a wet one.