User manual
ATVEL F16 Evo
F16 Evo · F16 Evo MAX · F16 Evo Home
Multifunctional wet & dry cordless vacuum cleaner
Please read this manual carefully before using the appliance.
1Safety cautions
- 1Before using this appliance, read this manual carefully and assemble the appliance accordingly. Please keep this manual in a safe place. If you give this appliance to other people to use, also give this manual. Any wrong operation not as instructed by the manual can cause damage to the product or cause harm to the user. This appliance is intended for household floor cleaning only (apartments and houses). It cannot be used for industrial or outdoor environment.
- 2This appliance must not be used by persons with physical, sensory, or cognitive impairments, or by those lacking experience or knowledge (including children), unless they are supervised or instructed by a responsible adult to ensure safe use.
- 3Do not touch the plug or any other parts of the appliance that contain electrical components.
- 4If the adapter or power cord is broken or damaged, stop using the appliance immediately. Contact after-sales service for repair to avoid hazards.
- 5Keep long hair, loose clothing, fingers, and other body parts away from airflow openings, and the twisting or running parts of this appliance. Do not put the dust sucking tube or other accessories towards eyes, ears or put them into the mouth.
- 6When not using the appliance or before cleaning or performing maintenance, unplug the appliance from the electrical outlet.
- 7If the appliance cannot work normally because of falling down, broken, or being left outside or falling into water, please do not operate the appliance, contact the after-sale service and repair the appliance in order to avoid any dangers to any human beings.
- 8When using the appliance, if you notice an electrical fault, motor overheating, abnormal noise, smell, weak suction, or overheating of the appliance body, stop using immediately and contact service.
- 9Use the designated adapter to charge the appliance, if using another type of adapter, it may cause the problems on batteries or cause hazard or explosion because of extremely overheating of the batteries.
- 10After unpacking the appliance, please dispose of plastic packaging bags in order to avoid any danger of suffocation on the children.
- 11Do not leave the appliance outdoors or in freezing conditions, and do not place it near heat sources.
- 12Do not wash the appliance or any of its parts with water hotter than 60℃. Don’t expose the appliance to fire or to very high temperatures in order to avoid the dangers of damaging the appliance or explosions.
- 13If you will not use the appliance for an extended period, turn off the power and unplug the charging base.
- 14After using the appliance, please clean the dirty water tank in time to keep the suction paths unblocked to avoid any suction loss or make the motor over-heated. In this way, this will prolong the service life.
- 15After using the appliance, please place the appliance in a dry place; humidity may cause insulation to deteriorate and shorten the service life.
- 16The body and motorized roller brush (with electrical components) must not be soaked or washed with water. Please routinely check if the suction nozzle is blocked to avoid the suction loss and bad performance.
- 17Please change the roller brush of the motorized roller brush when it is in power off state. When the appliance has any problems, do not mend it by yourself. Must contact the after-sale service or other professional technicians.
- 18Don’t disassemble the appliance. There are no user-serviceable parts. Also do not attempt to change the performance of the appliance, or it can cause dangers.
- 19Incorrect voltage can damage the motor or might cause danger to the users. The correct nominal voltage is shown on the rating label.
- 20When cleaning the stairs, be very careful to avoid falling down.
- 21Do not shake the appliance upwards and downwards or crush the appliance to avoid the dirty water flowing into the motor. When the appliance is working, please lift or carry the machine when transporting it.
- 22To avoid tripping, after using the appliance, place it close to the wall.
- 23If the clean or dirty water tank is not installed, do not turn the appliance on.
- 24Do not put any small objects near the air outlets. Do not block the exhaust air, remove all the small objects which will hinder the airflow to avoid the overheat of the appliance.
2Recommended usage areas
- 1This appliance is suitable for use on indoor hard floors. It may not perform properly on uneven floors.
- 2Don’t use the appliance near flammable or explosive objects.
- 3Do not use the appliance near operating stoves or heaters. The plastic shells will be deformed.
- 4Do not use the appliance to vacuum hot objects (such as lit cigarettes, matches, or hot ash), small objects (such as lime, cement, wood shavings, plaster dust, ash, coal dust, etc.), hazardous substances (such as solvents, cleaning liquids, etc.), chemical substances (such as acids, alkalis, cleaning liquids, etc.), flammable liquids (such as kerosene, gasoline, alcohol, paints, perfumes, toner from a laser printer, shoe polish, paint and varnish materials, etc.), sharp objects (such as glass shards, small toys, pins, paper clips, small stones, plaster chips, large pieces of paper, etc.) or any other unspecified materials.
3About the low-foaming cleaning liquid
- 1Adding excessive cleaning fluid may generate foam, which can enter the motor and cause damage or hazards.
- 2Use the cleaning fluid as suggested. To remove dirt, use low-foaming ATVEL Q8 detergent. And use suitable cleaning fluids provided with the appliance or recommended by the manufacturer. Do not use any fluids containing acids or alkalis or other hazardous materials which are harmful to the environment.
- 3Keep the cleaning fluid away from children. If the fluid gets into the eyes, you should rinse thoroughly with clean water. If swallowed, seek medical attention. Dispose of dirty water containing cleaning fluid in accordance with local environmental regulations.
4Vacuum cleaner overview
Part names
F16 Evo: vacuum cleaner handle × 1 pc, main unit × 1 pc, dirty water tank × 1 pc, clean water tank × 1 pc, roller brush × 1 pc, self-cleaning base × 1 pc, HEPA H12 filter × 1 pc, user manual × 1 pc, warranty card × 1 pc.
F16 Evo MAX: vacuum cleaner handle × 1 pc, main unit × 1 pc, dirty water tank × 1 pc, clean water tank × 1 pc, roller brush × 1 pc, self-cleaning base × 1 pc, HEPA H12 filter × 2 pcs, user manual × 1 pc, warranty card × 1 pc.
F16 Evo Home: vacuum cleaner handle × 1 pc, main unit × 1 pc, dirty water tank × 1 pc, clean water tank × 1 pc, roller brush × 2 pcs, self-cleaning base × 1 pc, HEPA H12 filter × 1 pc, user manual × 1 pc, warranty card × 1 pc.
LED panel introduction
5How to assemble the vacuum cleaner
1. Assemble the handle to the main vacuum cleaner unit.
Insert the lower end of the handle into the upper hole of the main vacuum cleaner unit, until you hear a clear click, confirming the handle is properly assembled with the main vacuum cleaner unit (see Fig. 1 and Fig. 2).
2. Assemble the clean water tank onto the main vacuum cleaner unit.
- 1Open the Cap of the clean water tank (see Fig. 3).
- 2Fill the clean water tank without exceeding the MAX line (see Fig. 4).
- 3Lock the Cap of the clean water tank (see Fig. 5).
- 4Install the clean water tank into the correct position on the main unit until you hear a clear click (see Fig. 6 and Fig. 7).
3. Assemble the dirty water tank onto the main vacuum cleaner unit.
- 1The bottom of the dirty water tank should be aligned with the corresponding slot at the bottom of the fuselage (see Fig. 8).
- 2Then push the dirty water tank into place until the release button clicks. It indicates that the dirty water tank is properly installed (see Fig. 9).
4. Assemble the roller brush onto the cavity of the motorized roller brush.
Place the roller brush correctly in the motorized roller brush (see Fig. 10). Firstly, put the right end of the roller brush onto the right side of the motorized roller brush, then insert the left end of the roller brush onto the left side. A locking mechanism secures the roller brush firmly in the motorized roller brush.
5. Assemble the upper cover onto the roller brush.
Fit the upper cover onto the roller brush until you hear it click (see Fig. 12). Firstly, you should match the front part onto the roller brush head part. There are two square holes in the front of the motorized roller brush. Then press the upper cover onto the motorized roller brush. There is a locking button. When these two parts assembled well, you can hear a locking sound.
6. Assemble the charging and auto-clean base.
- 1Take out the base and check whether the cord of the adaptor is well connected with the base
- 2Put the plug of the adapter into the power socket.
- 3Place the vacuum cleaner onto the base (see Fig. 15).
- 4A voice prompt will announce “Charging”.
6How to use the vacuum cleaner
Please fully charge the machine before use.
- 1Take the machine out of the charging base and adjust the machine to the normal angle for use.
- 2Press the switch button to start the machine, and the machine will enter the "Auto Spray Mode". When cleaning the floor normally, use "Auto Spray Mode".
- 3Press the ECO/MAX button to adjust suction for different tasks. For normal cleaning, use ECO Mode. For heavily soiled floors or stubborn dirt, use MAX Mode.
- 4If the clean water in the clean water tank is used up, the “Clean Water Tank Low” indicator on the display panel will light up, and a voice prompt will announce: “Clean water tank is low”. The user needs to add water to the clean water tank. The machine will continue to operate even if the clean water tank is empty.
- 5When the sewage in the dirty water tank is so full that the float rises and is sucked by the air inlet, the noise of the motor is increased. The "dirty water tank full indicator" on the board will light up, and a voice prompt will announce ‘Dirty water tank is full.’ Empty and clean the dirty water tank, reinstall it, and then resume use. When the dirty water tank is full of water, the machine will shut down automatically, unable to work.
Tip: Once you are familiar with the device, if you want to turn off the voice, you can press the "+/-" key for 10 seconds after starting up. Turn off the voice, and press and hold the "+/-" key for 10 seconds to turn on the voice.
Auto-clean mode
- 1When you want to auto-clean the appliance, place the appliance on the charging base and follow the instructions below.
- 2Press the self-cleaning button and the light will be on. If the remaining battery power is insufficient to perform self-cleaning, the charger will first recharge the machine. Once the battery has enough power, the self-cleaning mode will start automatically. At the same time, a voice prompt will announce that self-cleaning has started.
- 3When the remaining power of the machine is not enough to complete the self-cleaning work, the charger will charge the machine first, and a voice prompt will announce that self-cleaning has been scheduled. When the power reaches the self-cleaning workload, the machine will immediately start the self-cleaning mode and clean the machine.
- 4After the end of the cleaning work, the machine is turned off, and the charger continues to charge the machine. When the battery is fully charged, the power indicator light goes out.
After auto-clean
- 1Hold the hooking part of the dirty water tank, press the release button and pull the dirty water tank downwards and take out the dirty water tank from the cavity of the main body of the appliance.
- 2Take out the filtering assembling part of the dirty water tank, then empty the dirty water tank.
- 3Wash the dirty water tank with clean water
- 4Finally, reassemble the dirty water tank by reversing the disassembly steps to assemble the dirty water tank into the machine. (see fig. 17 and fig. 18).
After auto-clean, take the roller brush out from the motorized roller brush in the opposite steps. And put the motorized roller brush onto the right position of the charging base, do not expose the roller brush under sunshine. (see fig. 19 and fig. 20).
- 1Machine should be stored in a cool and dry place, away from direct sunlight.
- 2It is recommended to replace the HEPA and roller brush once every 6 months.
- 3The specific frequency of replacement is based on the actual use.
7Technical specifications
| Item | Specification |
| Name | Cordless Wet & Dry Vacuum Cleaner |
| Model | F16 Evo / F16 Evo MAX / F16 Evo Home |
| Rated Voltage | 29 V |
| Motor Power | 190 W |
| Charging Voltage | 31 V |
| Battery Capacity | 3000 mAh |
| Vacuum | 16 – 18 kPa |
| Modes | ECO / MAX |
| Operating Time | ECO – 51 min / MAX – 40 min |
| Charging Time | 4 h |
| Noise Level | 78 dB |
| Clean Water Tank | 485 ml |
| Dirty Water Tank | 400 ml |
| Display | LED |
| Battery Type | Lithium |
| Self-Cleaning Function | Yes |
| Filter | Aqua Filter, washable HEPA H12 |
| Voice Function | Yes |
| Indicators | Operating mode, battery level, water supply, dirty water tank full, lack of water, self-cleaning in progress |
| Motor | Brushless BLDC |
| Self-Propelled Drive | Yes |
| Dimensions | 26 × 25 × 111 cm |
| Weight | 3.4 kg |
8Troubleshooting
| Trouble | Solution |
| Not working | 1. Check if the appliance is charged. 2. Check if the vacuum cleaner is in the upright position, as it may not operate otherwise. 3. Check if the roller brush is in the correct position. |
| Reduced suction and abnormal noise | 1. Check inlet if there is anything stuck. 2. Check if the dirty water tank is installed correctly. 3. Check if the dirty water tank and filter are clean. |
9Environmental protection
Attention:
- 1Remove the battery before disposal.
- 2Make sure the appliance is turned off before removing the battery.
- 3Batteries contain harmful substances to the environment. Do not throw them into the trash can directly. Dispose of them properly according to waste classification regulations.
10Guarantee
We offer a one-year warranty on all our products. We will repair, replace, or refund the product within the warranty period and scope of warranty service, restoring normal functionality free of charge within a reasonable time. Products outside the warranty period or scope will be covered by a paid repair service in accordance with this service policy. If your product needs warranty servicing, please email the original or copy of the purchase invoice, the product or accessory that requires warranty to [email protected] with the subject line "Warranty Service". If you are unable to provide valid evidence such as the original or photocopy of the invoice for the product or accessory, you may be declined free of charge warranty servicing.
The following conditions do not apply to warranty and replacement
terms:
- 1Damage caused by normal wear and tear.
- 2Damage caused by human factors (including but not limited to: damage caused by falling, squeezing, collision, damage caused by liquid splashing, chemical corrosion, foreign objects entering the product).
- 3Damage caused by improper use or improper maintenance (including but not limited to: for abnormal use, damage caused by incorrect connection and test).
- 4It has been dismantled or repaired by any person or enterprise other than the after-sales service center or authorized service center, or the serial number has been removed, the altered tamper-evident sticker is damaged or illegible.
- 5The product is out of warranty.
- 6Damage caused by force majeure.
11Support
If you have any queries regarding your ATVEL appliance, call +1 229 252 83 58 or e-mail [email protected] or visit www.atvel.com/support for online help, general tips and useful information about ATVEL.
12Exceptions
The manufacturer shall not be liable under the terms of the warranty if:
- 1The device has mechanical damage caused by a strong external force that occurred during the operation of the device.
- 2Debris has entered the appliance motor due to improper installation of the dust collector or when using the vacuum cleaner without filters.
- 3The failure was caused by misuse, neglect, or use contrary to the manufacturer's recommendations, or if the failure was caused by power surges or damage during transportation.
- 4The malfunction was caused by using electrical current that was different from the recommended specifications.
- 5Repairs were carried out independently or by unauthorized persons.
- 6The device was used for rental or non-domestic purposes.
- 7The manufacturer reserves the right not to provide any type of warranty service at its sole discretion.
- 8Repair/replacement of units and components subject to natural wear and tear during operation, including: power cords, filters, rollers and wheels, roller brushes and soles of motorized roller brush and attachments and all associated elements.
- 9Malfunctions of the product due to its use in conditions not intended for this purpose: cleaning in premises under repair or construction; during storage and use in an environment with high humidity (more than 90%) or at a temperature below 0 °C, use outdoors.
- 10Repairs in case of cleaning construction dust and debris with the vacuum cleaner, as well as fine dust such as flour, carpet cleaning powder, etc.
- 11Malfunctions caused by moisture ingress into the internal components of the vacuum cleaner (including the cyclonic system).
- 12Clearing blockages, cleaning filters and other components of the product, as this is the responsibility of the user of the product.
- 13Malfunctions of the product caused by using the device in a country for which it was not certified.
- 14There is damage to the vacuum cleaner due to lack of proper maintenance. Clogged roller brush duct or sponge filter due to lack of self-cleaning/manual cleaning is not covered by the warranty.
- 15When using detergent, the dirty water tank may overflow with foam.